AENEAMAdvanced membrane technologies

Ceramics with porosity by design.

AENEAM develops and manufactures ceramic membranes, solid oxide cells and porous supports in Zaragoza. We cover the complete process chain, from raw powder to the tested component, at laboratory and pre-pilot scale.

Move the cursor to push the flow

The tape casting process chain

Tape casting is our core shaping technology. Each step, from powder conditioning to co-sintering, is matched to the microstructure the final component needs. Casting is done on a tape caster designed and built in-house.

1

Raw powder

Selection and conditioning of ceramic raw powders. Particle size distribution, specific surface area and phase purity set the limits of the later microstructure.

2

Slurry preparation

The powder is deagglomerated and dispersed in water or an organic solvent, then homogenised with binder and plasticiser. The slurry is filtered and de-aired, and its rheology adjusted to the casting step.

3

Tape casting

A doctor blade spreads the slurry onto a moving carrier film. After drying, the result is a flexible green tape of uniform thickness, from tens to several hundred micrometres.

4

Multilayer build-up

Functional layers are added on the dried tape by co-casting a second tape on top or by slot-die coating, or separate tapes are joined by lamination and calendering. Thickness and porosity are set layer by layer.

5

Debinding and co-sintering

The organics burn out and the multilayer is co-sintered into one monolithic body: a gas-tight dense layer between porous supports with graded porosity.

6

Characterisation and testing

Microstructural analysis of every batch, and functional testing under gas flow and at operating temperature on our own test rigs.

Made in our lab

Components and microstructures from our own production, from the macro to the micro scale. Besides tape casting we use freeze casting, 3D robocasting and DLP printing where the geometry requires it.

Where our ceramics go

Energy conversion, gas separation and catalysis: applications in which the microstructure of the ceramic determines performance.

Oxygen-transport membranes

Dense mixed-conducting membranes on porous supports, to separate pure oxygen from air at high temperature.

Solid oxide cells

Tape-cast and freeze-cast symmetrical cells for fuel cell (SOFC) and electrolysis (SOEC) research.

Catalytic reactors

Structured ceramic supports for catalysis, including CO₂ hydrogenation to synthetic fuels.

Gas and liquid separation

Inorganic membranes and filters with micro- and macro-porosity tuned for each separation.

Range of services

For industrial partners and research groups, from a feasibility study to prototypes and small series.

Slurries and green tapes

Development of slurries and green tapes from oxide ceramic powders, including rheological adjustment for casting.

Multilayer components

Co-casting, slot-die coating, lamination and calendering of functional layers for membranes and solid oxide cells.

Thermal processing

Studies on drying, debinding and co-sintering of multilayers, aimed at flat, crack-free components.

Microstructure and performance

Microstructural characterisation and optimisation, and evaluation of solid oxide systems under realistic operating conditions.

Prototypes and small series

Manufacture of components to specification at laboratory and pre-pilot scale.

Consultancy and R&D partnership

Independent process consultancy, feasibility studies, and participation in national and European research projects.

About AENEAM

AENEAM Advanced Membrane Technologies is an independent engineering company based in Zaragoza, Spain, specialised in the processing of advanced ceramics. It is led by Dr Jonas Gurauskis, a materials scientist with long experience in ceramic membranes, solid oxide cells and reactors for synthetic fuels.

Projects are handled directly by the people who design and manufacture the components.

  1. Founded in Denmark as AENEAM IVS.
  2. Incorporated in Zaragoza as AENEAM Advanced Membrane Technologies S.L.
  3. Ceramic processing, prototyping and testing for energy conversion, gas separation and catalysis.

Tell us what you need to make.

Describe the component, the material and the operating conditions. We will get back to you with a first assessment.

info@aeneam.com
WhereZaragoza, Spain
LanguagesEnglish, Spanish, Lithuanian